Release Agents

Showing 13 of 13 results
  • EJECT-IT 33 PETROLEASE

    EJECT-IT 33 PETROLEASE

    £12.50 £15.00 (inc. VAT)
    A sprayable wax release agent, suitable for the release of polyurethanes, polyesters and plaster. 12oz
  • MACSIL

    MACSIL

    £9.00 £10.80 (inc. VAT)
    A sprayable silicone release agent, designed specifically for releasing polyurethanes, polyesters and epoxy resins.
    Out of stock
  • MACWAX

    MACWAX

    £9.00 £10.80 (inc. VAT)
    A sprayable wax release agent, suitable for the release of polyurethanes, polyesters and plaster.
  • MIRRORGLAZE

    MIRRORGLAZE

    £15.00 £18.00 (inc. VAT)
    Like the Honey Wax, this is a hard wax, designed for application by hand. When applied onto fibre-glass it gives a great release, with a glossy finish.
  • MONSTER MAKERS FOAM LATEX MOULD RELEASE

    MONSTER MAKERS FOAM LATEX MOULD RELEASE

    From: £15.00 £18.00 (inc. VAT)
    Monster Makers foam release agent is a powder type release agent that is brushed into the mould prior to filling with foam latex allowing you to take the cured foam latex out without sticking. It is also a very good release agent for flat moulds when wanting to run prosthetic pieces out of.
  • MOULDWAX

    MOULDWAX

    £71.28 £85.54 (inc. VAT)
    A sprayable wax release agent, suitable for the release of polyurethanes, polyesters and plaster.
  • PVC SILVER VINYL STRIPPABLE

    PVC SILVER VINYL STRIPPABLE

    £12.00 £14.40 (inc. VAT)
    A spray that is used for spraying into fibre-glass before pouring addition silicones. It forms a barrier to stop the inhibition of the silicone. Can also be used to seal wet-clay sculptures to prevent moisture inhibiting the moulding material.
  • R7 RELEASE AGENT

    R7 RELEASE AGENT

    From: £16.00 £19.20 (inc. VAT)
    Liquid Wax release agent for a range of applications, creating a barrier between materials to keep them from bonding to one another and to aid the demoulding of casts from moulds.
  • SCOPAS PARTING AGENT

    SCOPAS PARTING AGENT

    From: £4.00 £4.80 (inc. VAT)
    Scopas Parting Agent will help you release your clay from your cast to create the perfect flat mould prosthetics.
  • SHELLAC

    SHELLAC

    From: £27.00 £32.40 (inc. VAT)
    M400 Pure shellac varnish works perfectly as a plaster sealer and can be thinned with methylated spirits.
    Out of stock
    Size
    1L
    5L
  • SURFACE BREAKER

    SURFACE BREAKER

    From: £5.83 £7.00 (inc. VAT)
    If you want a flawless, bubble-free finish for your plaster casts, and if you’d like your plaster and alginate moulds to be perfectly smooth and free of surface bubbles, then Surface Breaker is just what you need.
    Size
    50ml
    250ml
    500ml
    5L
  • TALLOW

    TALLOW

    £18.30 £21.96 (inc. VAT)
    A release agent specifically designed to seperate plaster from plaster.
  • ULTRA 4 EPOXY PARFILM

    ULTRA 4 EPOXY PARFILM

    £146.60 £175.92 (inc. VAT)
    An excellent mold release for removing epoxy parts out of molds. Also useful for removing silicone encapsulated appliances out of molds. Paintable mold release.