Moulding, Casting & Prototyping

Showing 96 of 116 results
  • PRO-GEL 10 SOFTENER

    PRO-GEL 10 SOFTENER

    Pro-Gel 10 Softener is designed to be mixed with the two-part Pro-Gel 10 system at a ratio of anywhere from 30-120%, you can soften the silicone to give it the feel of human skin for ultra-realistic feeling prosthetics.
    Out of stock
    Size
    500gm
    1kg
    5kg
    20kg
  • PS28 Silicone

    PS28 Silicone

    This kit is a condensation cure silicone with a 28 shore A hardness, ideal for all types of moulding. PS 28 Silicone can be mixed with PS Thixo at approximately two percent by weight. This turns the silicone into a paste, allowing you to brush on to vertical surfaces.
    Out of stock
    KIT SIZE
    1.1KG KIT
    5.5KG KIT
    22KG KIT
  • QC25

    QC25

    One of our newest and bestselling addition cure silicones! it is a 2 part translucent silicone with an exceptional low viscosity, with QC25 you have a “10 Minute” working time and can de-mould within 60 minutes. Perfect for quick mould making and perfect for flat moulds.
    Kit Size
    2kg kit
    10kg kit
  • PRO CAP PLASTIC (ACETONE BASED)

    PRO CAP PLASTIC (ACETONE BASED)

    The leading choice of bald cap plastic and encapsulator. Developed by industry leading prosthetic and make-up designers and silicone technicians, the Pro-Cap Plastic gives you the ultimate flex and creates easy dissolvable edges for your prosthetics and bald-caps.
    Out of stock
    Size
    120ml
    500ml
  • SUPER BALDIEZ

    SUPER BALDIEZ

    Super BALDIEZ ® edges can be blended into the skin using IPA in the same way other bald caps plastic use Acetone. It is more stretchy and snappier than regular Baldiez allowing for better blending in to the skin.This is much less likely to irritate skin when blending edges.
    Size
    120ml
    500ml
  • SUPER SPRAY BALDIEZ

    SUPER SPRAY BALDIEZ

    Mouldlife's original Super Baldiez® Encapsulate now available in an Aerosol. 400ML A new Cost Effective and easy way to apply your Encapsulate Plastic. No mixing needed and No Spray Gun and Air Compressor required.
    Out of stock
  • SCULPT GEL

    SCULPT GEL

    Mouldlifes Sculpt Gel system enables the make up artist to apply the prosthetic easily and directly to the person without creating any moulds or without doing any lifecasts.
    Size
    150ml
    300ml
  • T-30

    T-30

    T-30 is a translucent, addition-cure silicone with a 30 Shore A hardness. Low viscosity, ideal for mould-making. Perfect for flat moulds. - High chemical resistance to the aggressive components of some types of resin; - Extremely high tear strength (this feature guarantees high resistance to wear and tear); - High accuracy in reproducing very small details; - High dimensional stability in time and indeformability; - Remarkable resistance to high temperatures and aging; - Excellent anti-stick effect.
    Out of stock
    Kit Size
    2kg kit
    10kg kit
  • T4 SILICONE

    T4 SILICONE

    T-4 Silicone is a 40A Shore hardness silicone that has a high tear strength and outstanding release properties, it has very low shrinkage and great dimensional stability .
    Out of stock
    Kit Size
    1.1kg kit
    5.5kg kit
    22kg kit
  • 3M MASKS

    3M MASKS

    3M MASKS 4251, 9312, 8822 & 4279
    Mask
    4279 CHEMICAL MASK
    4251 DUST MASK
  • 3mm CHOPPIES FINE

    3mm CHOPPIES FINE

    Loose chopped strand fibres, used for hand application into fibre-glass (in order to add structural strength).
    Size
    1kg
    5kg
    20kg
  • 600LTR FROTH PAK

    600LTR FROTH PAK

    FROTH-PAK™ comes in the form of portable two component polyurethane spray foam kits which enables the professional to produce polyurethane foam of exceptionally high quality, quickly and easily, wherever and whenever required. 600L
    Out of stock
  • ACETONE

    ACETONE

    Used for thinning polyester resin, cleaning fibre-glass tools and for dissolving superglue before hardening.
    Size
    100ml
    500ml
    1L
    5L
  • AD-260

    AD-260

    AD-260 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for the molding of furniture, picture frames and architectural materials. AD 260 is exceptionally good where high durometer and dimensional stability are required.
    KIT SIZE
    1kg
    5kg
    20kg
  • AD-SIL 20

    AD-SIL 20

    AD-SIL 20 is a 2 part addition cured RTV silicone rubber which vulcanizes at room temperature.
    Kit Size
    2kg kit
    10kg kit
  • AH110

    AH110

    AH 110 is an epoxy laminating system, casting resin. With great mechanical properties and dimensional stability. Dependent upon application various hardeners can be supplied with this system to meet requirements. Comes with a choice of TGS (fast) or TGL (slow) as a 6kg kit
  • ALGINATE

    ALGINATE

    It is a skin-safe material, perfect for anyone from novices simply wanting to cast their children’s feet, right through to professionals in the life casting field.
    SPEED
    FAST 3-5 MINS (FX3)
    SLOW 7-9MINS (FX9)
  • ALUMINIUM POWDER

    ALUMINIUM POWDER

    Aluminium Metal powder can be dusted into moulds and added to a variety of resins to create casts that, once buffed, have a metal-like finish.
    Out of stock
  • ATH FILLER (ALUMINIUM TRIHYDRATE)

    ATH FILLER (ALUMINIUM TRIHYDRATE)

    Aluminum Tri-hydrate as its more commonly known is an inexpensive filler powder that can be added to polyester gelcoats & resins for bulking out. It also has a secondary use that if added to polyurethane it will provide a fire-retardancy.
    Out of stock
  • BLACK GUNN FOAM

    BLACK GUNN FOAM

    This gunn foam is just a pigmented version of clear gunn foam. This can be pigmented to your desired colour.
  • BRASS POWDER

    BRASS POWDER

    These fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal powder are used to give a true metallic effect. Can be buffed, polished and a patina applied if required.
  • BRONZE POWDER

    BRONZE POWDER

    Metal powder. Can be dusted into moulds and added to a variety of resins to create casts that, once buffed, have a metal-like finish.
    Out of stock
  • BUILDERS BUCKETS

    BUILDERS BUCKETS

    Black 3 gallon hard-wearing builders bucket, ideal for mixing & pouring larger quantities of plaster.
  • CABOSIL

    CABOSIL

    A thixotropic agent which prevents sagging or dropping of resin when applied on vertical surfaces. Also ideal to use as a thickener with Pros-aide to create transfers.
    Size
    50ml
    1L
    5L
  • CABOSIL

    CABOSIL

    A thixotropic agent which prevents sagging or dropping of resin when applied on vertical surfaces. Also ideal to use as a thickener with Pros-aide to create transfers.
    Size
    50ml
    1L
    5L
  • CATALYST DISPENSER

    CATALYST DISPENSER

    Plastic dispenser which allows users to safely measure the correct amount of catalyst to add to polyester resins and gelcoats.
    Size
    15ml
    80ml
  • CHROMIUM

    CHROMIUM

    Chromium is an easy to spray custom chrome effect paint. 
  • CLEAR GUNN FOAM

    CLEAR GUNN FOAM

    A polyurethane foam which gives a great skin, and is used within the film industry to replicate props.
  • COPPER POWDER

    COPPER POWDER

    Metal powder. Can be dusted into moulds and added to a variety of resins to create casts that, once buffed, have a metal-like finish.
  • EJECT-IT 33 PETROLEASE

    EJECT-IT 33 PETROLEASE

    A sprayable wax release agent, suitable for the release of polyurethanes, polyesters and plaster. 12oz
    Out of stock
  • ELASTOSIL A07

    ELASTOSIL A07

    Elastosil A07 is a free-flowing, transparent, quality adhesion product that possesses excellent adhesion properties. The product offers skin formation within 2 to 5 minutes
    Out of stock
    Size
    90ml
    310ml
  • F-40 Fast Cast

    F-40 Fast Cast

    F-40 is a 2-part polyurethane filled system, with an incredible strength and low exotherm it is ideal for hard moulds or larger moulds where accuracy is needed.
    Out of stock
  • FC120

    FC120

    FC120 is a low-viscosity polyurethane casting resin that is very easy to use due to it’s simple 1:1 ratio system. It offers a quick demould time of 20 minutes and a working time of 2 minutes. FC120 creates fine detail reproduction and posseses excellent impact resistance.
    Kit Size
    2kg kit
    10kg kit
    50kg kit
  • FC60

    FC60

    FC60 is a low-viscosity polyurethane casting resin that is very easy to use due to it’s simple 1:1 ratio system. It offers a quick demould time of 20 minutes and a working time of 3-4 minutes. FC60 creates fine detail reproduction and posseses excellent impact resistance.
    Kit Size
    2kg kit
    10kg kit
    50kg kit
  • FINE CASTING PLASTER

    FINE CASTING PLASTER

    Fine casting plus is a general purpose casting plaster that is ideal for decorative plaster ware, foot and hand casts and a multitude of different applications.
    Size
    1kg
    5kg
    25kg
  • GLOVES

    GLOVES

    We stock three different types of gloves - Nitrile, Vinyl & Latex. Each pack contains 100 gloves
    Size
    S
    M
    L
    XL
  • GO CAST

    GO CAST

    GO-CAST is a self-releasing poly addition cure silicone which is ideal for making moulds of hands, feet and body parts, it comes as a 2-part system which when mixed together and applied to the skin creates the perfect replication.
    Out of stock
    KIT SIZE
    1KG KIT
    2KG KIT
    10KG KIT
  • GYPSONA

    GYPSONA

    Gypsona Plaster Bandage is made from a specially woven leno cloth, uniformly impregnated with the finest quality, fast-setting plaster of Paris that produces an even cast with an excellent finish. The bandage is spooled on a round core for superior bandage and stability whilst handling. Moisture resistant packaging improves the protection of the bandages prior to use.
  • IPA - 99.9% Isopropyl Alcohol

    IPA - 99.9% Isopropyl Alcohol

    IPA  ‘99% Isopropyl Alcohol’. Can be used to clean tools/surfaces or dilute a range of other materials
  • KP6 COUPLING PASTE

    KP6 COUPLING PASTE

    Aluminium filled, heat resistant coupling paste
    Out of stock
  • LAMINATING BRUSHES

    LAMINATING BRUSHES

    High quality laminating brushes with wooden or plastic handles, suitable for a wide range of composite uses (including gel-coat application and laminating with polyester or epoxy resins).
    Size
    1/2"
    1"
    2"
    3"
    4"
  • LARGE MIXING STICKS

    LARGE MIXING STICKS

    Useful large mixing stick, ideal for stirring pigments, gelcoats & more.
    Out of stock
    Size
    INDIVIDUAL
    100 PACK
  • LIFE FORM

    LIFE FORM

    LifeForm is a Poly addition cure RTV Silicone rubber which vulcanises at room temperature. The two components are mixed together at a 1:1 ratio which offers a prefect thixotropic mixture which is ready to be applied to the body.
    Out of stock
    KIT SIZE
    1KG KIT
    2KG KIT
    10KG KIT
  • MACSIL

    MACSIL

    A sprayable silicone release agent, designed specifically for releasing polyurethanes, polyesters and epoxy resins.
    Out of stock
  • MACWAX

    MACWAX

    A sprayable wax release agent, suitable for the release of polyurethanes, polyesters and plaster.
    Out of stock
  • MEDIUM FOAM

    MEDIUM FOAM

    A two part hand mixing foam with a good medium density and cell structure. Ideal for application where you need to combine a soft foam with great density. Expands 4-6x its initial volume Mix ratio 2.4-1 by weight
    Out of stock
  • MIRRORGLAZE

    MIRRORGLAZE

    Like the Honey Wax, this is a hard wax, designed for application by hand. When applied onto fibre-glass it gives a great release, with a glossy finish.
  • MIXING STICKS

    MIXING STICKS

    6″ Wooden spatulas, ideal for mixing small quantities of resins, silicones or any other liquids. Each box contains 100 spatulas.
  • MONO CUPS

    MONO CUPS

    Graduated plastic mixing cups which are ideal for measuring small amounts of materials. Volume levels are clearly displayed on both sides of these cups.
  • MONSTER MAKERS FOAM LATEX MOULD RELEASE

    MONSTER MAKERS FOAM LATEX MOULD RELEASE

    Monster Makers foam release agent is a powder type release agent that is brushed into the mould prior to filling with foam latex allowing you to take the cured foam latex out without sticking. It is also a very good release agent for flat moulds when wanting to run prosthetic pieces out of.
  • MONSTER MAKERS FOAM LATEX SYSTEM

    MONSTER MAKERS FOAM LATEX SYSTEM

    Monster Makers foam latex is a prosthetic grade natural foam latex. This is one of the leading foam latex systems in the industry, making it a popular product for both professional SFX artists and students alike.
  • MONSTER MAKERS MASK PAINT

    MONSTER MAKERS MASK PAINT

    Latex Mask Paints and Colorants are exclusive to The Monster Makers and can be used to paint slush molded Latex Halloween Masks and Props. Each pigment is a concentrated, pre-mixed paint medium developed for use on latex and have a unique, stretchy quality that allows them to bond to the latex rubber and flex without cracking or peeling.
    Out of stock
  • MOULDWAX

    MOULDWAX

    A sprayable wax release agent, suitable for the release of polyurethanes, polyesters and plaster.
  • OH4 GELCOAT SYSTEM

    OH4 GELCOAT SYSTEM

    Versatile gelcoat, easy to spread, good grinding properties, impact resistant surface negatives.
  • PADDLE ROLLERS

    PADDLE ROLLERS

    Perfect tool for a quick wet out and air remove on a large surface, This popular tool is also the least expensive and therefore one of the best value rollers. Its aluminium construction makes it lightweight and easy to use.
  • PF700L CLEAR CASTING RESIN

    PF700L CLEAR CASTING RESIN

    Water clear casting polyester resin system designed for applications in which extreme clarity and absence of colour are required. Works in conjunction with normal polyester catalyst.
  • PF915 FIRE RETARDANT RESIN

    PF915 FIRE RETARDANT RESIN

    PF915 is a filled class 0/1 fire rated laminating resin that when used in conjunction with class 0/1 gelcoat gives you a class 0 fire rating. White in colour. 25KG
    Out of stock
  • PLATSIL FS20

    PLATSIL FS20

    PlatSil® FS-20 (Fast-Setting) Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a milky white, Shore OO66/A20 rubber.
    Out of stock
    KIT SIZE
    1KG KIT
    2KG KIT
    10KG KIT
  • PLATSIL GEL 00

    PLATSIL GEL 00

    Use PlatSil Gels as mold rubbers, to create prosthetic appliances. We offer an array of accessory products that can be used independently or in conjunction with to increase working time; accelerate cure time; thicken the mix for brushing/layering; thin the mix for easier pouring or for softening; or “deaden” the rubber to soften and eliminate the snappy, synthetic look and feel of ordinary silicone rubbers.
    KIT SIZE
    1KG KIT
    2KG KIT
    10KG KIT
    36.36KG KIT
  • PLATSIL GEL 10

    PLATSIL GEL 10

    Use PlatSil Gels as mold rubbers, to create prosthetic appliances. We offer an array of accessory products that can be used independently or in conjunction with to increase working time; accelerate cure time; thicken the mix for brushing/layering; thin the mix for easier pouring or for softening; or “deaden” the rubber to soften and eliminate the snappy, synthetic look and feel of ordinary silicone rubbers.
    KIT SIZE
    1KG KIT
    2KG KIT
    10KG KIT
    36.36KG KIT
  • PLATSIL GEL 25

    PLATSIL GEL 25

    Use PlatSil Gels as mold rubbers, to create prosthetic appliances. We offer an array of accessory products that can be used independently or in conjunction with to increase working time; accelerate cure time; thicken the mix for brushing/layering; thin the mix for easier pouring or for softening; or “deaden” the rubber to soften and eliminate the snappy, synthetic look and feel of ordinary silicone rubbers.
    KIT SIZE
    1KG KIT
    2KG KIT
    10KG KIT
    36.36KG KIT
  • Platsil Gel 25 Deadener LV

    Platsil Gel 25 Deadener LV

    To soften Platsil Gel 25 without oil leaching use Deadener LV (Low Viscosity)
    Out of stock
    Size
    500gm
    1kg
    5kg
    18.18kg
  • PLATSIL SILIGLASS

    PLATSIL SILIGLASS

    A  2 part poly addition cure silicone that when fully cured gives you a water clear finish, it becomes a great SFX material when you crumble it together which gives you the exact look of broken glass.
  • PLATSIL SILIGLASS

    PLATSIL SILIGLASS

    A  2 part poly addition cure silicone that when fully cured gives you a water clear finish, it becomes a great SFX material when you crumble it together which gives you the exact look of broken glass.
  • POLYESTER CATALYST

    POLYESTER CATALYST

    A catalyst for curing polyester resins or gelcoats, which results in a hard finish. Refer to the user guide of each polyester resin or gelcoat for the correct mix ratio.
  • POLYESTER MATTING 300gm

    POLYESTER MATTING 300gm

    An emulsion-bound polyester matting. Weighing 300 grams per square meter, it works exceptionally well when you need a more open weave but require great strength. PLEASE NOTE DELIVERY ON THIS ITEM CAN TAKE 2-3 DAYS
  • POLYESTER MATTING 450gm

    POLYESTER MATTING 450gm

    An emulsion-bound polyester matting. Weighing 450 grams per square meter. This is our most sought-after matting as it covers all applications and is the standard grade used for fibreglass mould making. ​​​​​​​PLEASE NOTE DELIVERY ON THIS ITEM CAN TAKE 2-3 DAYS
  • POLYESTER MATTING 600gm

    POLYESTER MATTING 600gm

    An emulsion-bound polyester matting. Weighing 600 grams per square metre, ideal for structural application. ​​​​​​​PLEASE NOTE DELIVERY ON THIS ITEM CAN TAKE 2-3 DAYS
    Out of stock
  • POLYESTER MATTING 900gm

    POLYESTER MATTING 900gm

    An emulsion bound polyester matting weighting 900gm per square metre, ideal for structural application. ​​​​​​​PLEASE NOTE DELIVERY ON THIS ITEM CAN TAKE 2-3 DAYS
  • POLYESTER PIGMENT

    POLYESTER PIGMENT

    Polyester Pigments are used for mixing with polyester resins and gelcoats. 500gm Available in 6 different colours.
  • POLYURETHANE PIGMENT

    POLYURETHANE PIGMENT

    Our pigments are used in conjunction for colouring other PU systems to create a base colour. Available in 8 different colours
  • POLYWAX

    POLYWAX

    Soft carnauba wax, ideal for fibre-glassing. 4KG
  • PRIMER NO 3 (DG)

    PRIMER NO 3 (DG)

    ACC Primer № 3 is a specially formulated silicone based primer for use with addition cure silicone rubbers. 100gm
    Out of stock
  • PRO CHROME

    PRO CHROME

    Pro Chrome is a sprayable chrome paint. Use Pro Chrome to achieve mirror like effects.
    Out of stock
  • PRO-GEL 10

    PRO-GEL 10

    Pro-Gel 10 is a new advanced prosthetic-grade silicone. It is a two-part platinum silicone system with a mix ratio of 1:1.
    Out of stock
    KIT SIZE
    10KG KIT
    1KG KIT
    2KG KIT
    40KG KIT
  • PRO-GEL RETARDER

    PRO-GEL RETARDER

    Pro-Gel Retarder is a retarding component for slowing down the working and de-moulding times of our Pro-Gel systems by adding as little as 1 % by weight. It can also be used in similar addition cure silicones to achieve the same desired effect.
    Size
    100gm
    500gm
    1kg
  • PROCELL S3 SOFT FOAM

    PROCELL S3 SOFT FOAM

    Pro-cell S3 is a low density flexible Polyurethane foam. The system is designed to have a slow rise, with a cream time of 30-40 seconds, allowing plenty of time for mixing of casts up to 1kg in weight.
    Out of stock
  • PROCELL S4 FOAM

    PROCELL S4 FOAM

    A two part hand-mixing foam, perfect for applications which require a soft sponge-like result. Possesses an excellent skin in a closed mould. Mix ratio 2-1 by weight
    Out of stock
  • PS03 SYSTEM

    PS03 SYSTEM

    Is a very smooth fiber glassed filled epoxy resin moulding system, cures at room temperature with no shrinkage. When used with the KP6 coupling coat & OH4 Gelcoat you have the market leader in epoxy moulding systems.
  • PT FLEX 20

    PT FLEX 20

    PT Flex 20 Liquid Rubber is a flexible 20 shore A, fast-curing rubber, which has been developed specifically for prototyping and model making applications. It is excellent for casting decorative objects, production parts, tools, models, patterns, duplicate masters and more
  • PT FLEX 50

    PT FLEX 50

    PT Flex 50 Liquid Rubber is a flexible 50 shore . The fast-curing rubber has been developed specifically for prototyping and model making applications. It is perfect for casting decorative objects, production parts, tools, models, patterns, duplicate masters and more.
  • PT FLEX 60

    PT FLEX 60

    PT Flex 60 Liquid Rubber is a flexible 60 shore A, fast-curing rubber, which has been developed specifically for prototyping and model making applications. It is excellent for casting decorative objects, production parts, tools, models, patterns, duplicate masters and more.
  • PT FLEX 70

    PT FLEX 70

    PT Flex 70 Liquid Rubber is a two-part, liquid polyurethane system that cures (RTV) to a yellow/amber, Shore A70 rubber. PT Flex Series rubbers were specifically designed for prototyping and model making applications and offer fast pour times (~4 minutes) and fast demold times (~2 hours).
  • PT FLEX 85

    PT FLEX 85

    PT Flex 85 Liquid Rubber is a flexible 85 shore A, fast-curing rubber, which has been developed specifically for prototyping and model making applications. It is excellent for casting decorative objects, production parts, tools, models, patterns, duplicate masters and more
    Out of stock
  • PVA BLUE

    PVA BLUE

    A release agent for fibre-glass, it’s strong blue colour easily allows the user to determine which areas have been covered. 5L
    Out of stock
  • R7 RELEASE AGENT

    R7 RELEASE AGENT

    Liquid Wax release agent for a range of applications, creating a barrier between materials to keep them from bonding to one another and to aid the demoulding of casts from moulds.
  • ROBERLO MAXILIGHT

    ROBERLO MAXILIGHT

    Roberlo Maxilight is a lightweight polyester bodyfiller. Formulated for fast work, dries rapidly and is easy to sand. Its creamy consistency permits easy repair of large areas. Complete with filler hardener. 3.5L
  • RTV 3481 Silicone

    RTV 3481 Silicone

    RTV-3481 is a market leading condensation cure silicone from Dow Corning. RTV-3481 offers outstanding tear strength and high elasticity for easy demoulding of complex replica parts. A thixotropic agent can be added to the silicone for vertical surface replication.
    Out of stock
    KIT SIZE
    1.1KG KIT
    5.5KG KIT
    22KG KIT
  • SCOPAS PARTING AGENT

    SCOPAS PARTING AGENT

    Scopas Parting Agent will help you release your clay from your cast to create the perfect flat mould prosthetics.
    Out of stock
  • SCOTT BADER CRYSTIC 2.446 PALV RESIN

    SCOTT BADER CRYSTIC 2.446 PALV RESIN

    A pre-accelerated, low styrene emission, unsaturated polyester resin. Upon adding polyester catalyst, the colour of the resin changes from blue to it’s natural tone. 25kg
    Out of stock

Planning to mould something or Cast something? Look no further than this section, with a huge portfolio of RTV silicones and polyurethanes to mould even the most complex pieces of work we not only offer you the right material but guidance along the way. In the casting section we offer our own brand Fast casts FC 120 & FC60 and now have an extensive range of Mercury-free clear casting resins.